High Frequency PCB Made on RO4535 | Rogers 4535 RF PCB

Taconic RF-35TC High Frequency PCB

 

Our PCB Capability
PCB Material:	PTFE based ceramic filled fiberglass substrate
Designator:	RF-35TC
Dielectric constant      @ 10GHz:	3.50
Layer count:	1 Layer, 2 Layer, Multilayer, Hybrid type
Copper weight:	0.5oz, 1oz, 2oz
PCB thickness:	0.3mm, 0.6mm, 0.8mm, 1.6mm
	(10mil, 20mil, 30mil, 60mil substrate)
Solder mask:	Green, Red, Black, White, Blue etc.
PCB size:	≤400mm X 500mm
Surface finish:	Bare copper, HASL, ENIG, Immersion tin etc.

At present, our company can provide single sided PCB, double sided PCB, multi-layer PCB and hybrid PCB.

The copper thickness is mainly 1oz and 2oz.

According to different uses, there are many kinds of thickness to choose from, such as 0.3mm, 0.6mm, 0.8mm and 1.6mm.

The color of solder mask is available in green, red, black, white and blue etc.

Our maximum PCB size is within 400X 500mm.

A variety of surface finishes are available, such as bare copper, Hot air level, immersion gold and immersion tin.

 

The basic colour of RF-35TC PCB is brown and grey.

We focus on prototypes, small batch and mass production.

If you are interested in RF-35TC high frequency PCB, we are willing to share our price with you. We are looking forward to hearing any feedback from you and wish you all the best.

Thanks for your time to check this e-mail and hope to hearing from you soon.

 

Warm Regards

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

Taconic RF-35TC High Frequency PCB

Rogers RO4350B High Frequency PCB

 

RO4350B high frequency material has excellent high frequency performance due to low dielectric tolerance and loss, stable electrical properties vs frequency, low thermal coefficient of dielectric constant. It's widely used in power divider, coupler, power amplifier, trunk amplifier, 3G and 4G antenna.

 

PCB Capability

PCB Material:	Glass reinforced hydrocarbon ceramic laminates
Code:	Rogers RO4350B
Dielectric constant:	3.48  ±0.05 (process)
	3.65 (design)
Layer count:	1 Layer, 2 Layer, Multilayer, Hybrid type (Mixed)
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
PCB thickness:	10mil (0.254mm), 20mil (0.508mm)
	30mil (0.762mm), 60mil (1.524mm)
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, Silver, OSP,etc.

 

PCB Services
1) Prototype to small runs

2) Mass production service

3) Double sided to multilayers

4) Hybrid with FR-4

5) Thickness ranges 0.3mm to 1.6mm

6) Blind via, buried via, micro via, edge castellation plated

7) Immersion gold, Immersion silver, HASL LF

8) Impedance controlled
9) Door to door shipping

 

If you have requirement on RO4350B high frequency PCB's, please do not hesitate to contact us by simply reply back to this email.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.