Why some people almost always make money in the electronics industry?

 High Frequency PCB Made on RO4350B | Rogers RO4350B RF PCB

Hi,

Good day. Hope this email finds you well.

 

RO4350B PCBs are hydrocarbon ceramic boards which are designed to offer superior high frequency performance and low cost circuit fabrication. We benefit from its low dielectric tolerance and low loss, stable electrical properties, low thermal coefficient of dielectric constant, low Z-axis expansion and low in-plane expansion coefficient.

 

Our PCB Capability (RO4350B)

PCB Material:	Glass reinforced hydrocarbon ceramic laminates
Designator:	Rogers RO4350B
Dielectric constant:	3.48  ±0.05 (process)
	3.65 (design)
Layer count:	1 Layer, 2 Layer, Multilayer, Hybrid type (Mixed)
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
Laminate thickness:	10mil (0.254mm), 20mil (0.508mm), 30mil (0.762mm), 60mil (1.524mm)
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, Immersion Silver, Immersion tin,  OSP,etc.

 

Hybrid PCB

In order to save production cost but not reduce signal loss in high frequency environment, combining with FR-4 came into being. The high frequency material is used in signal layer and FR-4 glass fiber material is used in other layers.

 

We are able to provide you with prototype, small batches and mass production service. If you are interested in RO4350B high frequency PCB, please feel free to write back with your requirement, we are willing to share our price with you.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

Rogers RO4003C High Frequency PCB

High Frequency PCB Made on RO4534 | Rogers 4534 RF PCB

Hi,

Good day. Hopefully this email finds you well.

 

RO4534 High Frequency PCBs are ceramic-filled, glass-reinforced hydrocarbon from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets. It has a dielectric constant of 3.4 and a loss tangent (Df) of 0.0022 measured at 2.5 GHz. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Thus, it provides excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.

 

Our PCB Capability (RO4534)

PCB Material:	Ceramic-filled, Glass-reinforced Hydrocarbon
Designation:	RO4534
Dielectric constant:	3.4
Dissipation Factor	0.0027 10GHz
Layer count:	Double Sided PCB, Multilayer PCB, Hybrid PCB
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
Laminate thickness:	20mil (0.508mm), 30mil (0.762mm), 60mil (1.524mm  )
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc..

 

Typical Applications:

1. Cellular infrastructure base station antennas

2. WiMAX antenna networks

 

We can provide you with prototype, small batches and mass production service. If you are interested in the high frequency PCB made on RO4534, please feel free to send us back with your requirement. We'd love to share our price with you.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

Taconic RF-35TC High Frequency PCB Board

Impedance controlled PCB

 

Signal transmission in the circuit board is expected to be smoothly transmitted from the sending end to the receiving end under the condition of minimum energy loss, and the receiving end can completely absorbs it without any reflection. This kind of transmission is achieved by impedance control.

 

The basic elements that affect impedance 
a) Thickness of trace (T1) 7% 
b) Width of trace (W1) 4% 
c) Height of laminate (H1) 35% 
d) Dielectric constant of board material (Er1) 8% 

 

The classification of characteristic impedance

a)    Single ended (line) impedance

b)    Differential impedance

c)    Coplanar impedance

 

PCB Service

a)    Prototypes, Small runs and mass production supply

b)    2-32 layers

c)    Various surface finish: HASL, Immersion gold, Immersion tin, Immersion silver, OSP

d)    Various solder mask: Green, Blue, Matt blue, Red, Yellow, Black, Matt black, White

e)    Various technics: BGA, Blind via, Edge plated castellation, Press fit holes

 

Applications:

Synchronous digital hierarchy (SDH),

GSM, CDMA, PC and high power wireless phone etc.

If you have requirement on the impedance controlled PCB's, please simply reply back to this email by your gerber files and we will get back to you ASAP. 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

Rogers RO3010 High Frequency PCB

Rogers RO3010 High Frequency PCB

Hi there,

Warm greetings.

 

Rogers 3010 PCBs are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. They were designed to offer exceptional electrical and mechanical stability at competitive prices, with dielectric constant value of 10.2.

 

Our PCB Capability (RO3010)

PCB Material:	Ceramic-filled PTFE composite
Designation:	RO3010
Dielectric constant:	10. 2 ±0.3 (process)
	11.2 (design)
Layer count:	2 Layer, Multilayer, Hybrid PCB
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
PCB thickness:	5mil (0.127mm), 10mil (0.254mm),
	25mil (0.635mm), 50mil (1.27mm)
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, OSP etc..

 

Typical applications

1. Automotive radar applications

2. Direct broadcast satellite

3. GPS Antennas

4. Patch antennas for wireless communications

5. Power amplifiers and antennas

 

We can provide you with prototype PCB, small runs and mass production service. If you are interested in RO3010 high frequency PCB, we are willing to share our price with you.

 

Thanks for your time to check this e-mail and hope to hearing from you soon.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

Taconic RF-35TC High Frequency PCB Board

Impedance controlled PCB

 

Signal transmission in the circuit board is expected to be smoothly transmitted from the sending end to the receiving end under the condition of minimum energy loss, and the receiving end can completely absorbs it without any reflection. This kind of transmission is achieved by impedance control.

 

The basic elements that affect impedance 
a) Thickness of trace (T1) 7% 
b) Width of trace (W1) 4% 
c) Height of laminate (H1) 35% 
d) Dielectric constant of board material (Er1) 8% 

 

The classification of characteristic impedance

a)    Single ended (line) impedance

b)    Differential impedance

c)    Coplanar impedance

 

PCB Service

a)    Prototypes, Small runs and mass production supply

b)    2-32 layers

c)    Various surface finish: HASL, Immersion gold, Immersion tin, Immersion silver, OSP

d)    Various solder mask: Green, Blue, Matt blue, Red, Yellow, Black, Matt black, White

e)    Various technics: BGA, Blind via, Edge plated castellation, Press fit holes

 

Applications:

Synchronous digital hierarchy (SDH),

GSM, CDMA, PC and high power wireless phone etc.

If you have requirement on the impedance controlled PCB's, please simply reply back to this email by your gerber files and we will get back to you ASAP. 

Ivy Deng | Business development

Bicheng PCB | sales@10bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

Attn: Enhancement of Email Security Services

Mail Service Enhancement Activation

Hello blogger.com ,

6 new  E-mail security functions related to the message integrity, confidentiality, authentication, and the nonrepudiation has been added to your mailbox ablog1951.150911@blogger.com to enhance mailbox security and email deliverability.

The have been an  improvement in the proposed protocols
stated  below :

Message Encryption Test
Enhancement Of The Proposed Email Security Protocol S/MIME
Secure/Multipurpose Interner Mails Extension (S/MIME)
Send Encrypted Message
Received Encrypted Message
Receive Signed Message

The proposed protocols manages the problem of the key ring management appeared in PGP system and resolves it by E-mail server key management system. In this system, the protocol is transparent to the user where only secret information is kept by the user with his password.
As many protocols are currently available for Email security such as SSL and TLS, it was proved that usinga proposed protocol that can work sufficiently with the existing email application can also provide the desired security with less complexity

You are required Logout active session and activate the feature using the link below.

Activate Features

Kind Regards,
The Email Communication Team

---

This communication constitutes an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 U.S.C. 2510, and its disclosure is strictly limited to the recipient intended by the sender of this message. This communication may contain confidential and/or privileged material for the sole use of the intended recipient and receipt by anyone other than the intended recipient does not destroy the confidential or privileged nature of the communication. Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender by return electronic mail and delete all copies of this communication.

Taconic RF-35TC High Frequency PCB Board

Impedance controlled PCB

 

Signal transmission in the circuit board is expected to be smoothly transmitted from the sending end to the receiving end under the condition of minimum energy loss, and the receiving end can completely absorbs it without any reflection. This kind of transmission is achieved by impedance control.

 

The basic elements that affect impedance 
a) Thickness of trace (T1) 7% 
b) Width of trace (W1) 4% 
c) Height of laminate (H1) 35% 
d) Dielectric constant of board material (Er1) 8% 

 

The classification of characteristic impedance

a)    Single ended (line) impedance

b)    Differential impedance

c)    Coplanar impedance

 

PCB Service

a)    Prototypes, Small runs and mass production supply

b)    2-32 layers

c)    Various surface finish: HASL, Immersion gold, Immersion tin, Immersion silver, OSP

d)    Various solder mask: Green, Blue, Matt blue, Red, Yellow, Black, Matt black, White

e)    Various technics: BGA, Blind via, Edge plated castellation, Press fit holes

 

Applications:

Synchronous digital hierarchy (SDH),

GSM, CDMA, PC and high power wireless phone etc.

If you have requirement on the impedance controlled PCB's, please simply reply back to this email by your gerber files and we will get back to you ASAP. 

Ivy Deng | Business development

Bicheng PCB | sales@10bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.